For laboratory fruit ripeness analysis, MultiMeter combines the functions of DA Meter, Kiwi Meter and Cherry Meter in a single instrument. By changing the measuring head, the same unit works on climacteric fruit, kiwifruit and cherries, or performs absorbance measurements at up to six wavelengths, between the visible and near-infrared range.
It is designed for research laboratories, experimental centres, technical services of cooperatives and producer organisations, and for the quality laboratories of packing houses.
One instrument, several applications
Anyone who analyses several fruit species usually has to buy different instruments. With MultiMeter you only need one base unit and the heads you require:
- DA headfor apples, pears, peaches, plums, apricots and other climacteric fruit;
- Kiwi headfor green- and gold-fleshed kiwifruit;
- Cherry headfor cherries;
- absorbance measurementsat up to six wavelengths, for research and the development of new protocols.
Measure and analyse data on its own
MultiMeter takes and stores measurements even when it is not connected to a computer. It lets you configure measuring protocols and view results both as numbers and as charts, histograms and class breakdowns. Laboratory staff can therefore check the distribution of a sample straight away, without exporting the data.
For further processing, data are transferred to a computer via Ethernet, Wi-Fi or USB stick.
A system that grows with your needs
MultiMeter comes with one measuring head of your choice. Additional heads can also be bought later and are swapped in moments. The instrument automatically recognises the connected head and adapts its operation to the new configuration. You can start with your main species and add the others when you need them.
Upgradable, configurable software
The software is updated by the user directly with a USB stick. New options can be bought and enabled after purchase, so MultiMeter evolves over time without having to replace the instrument.
Faster measurements with autotrigger mode
With the DA and Kiwi heads, MultiMeter starts the measurement by itself when it is placed on the fruit, without pressing any button. This mode speeds up the analysis of large samples, for example when dozens of fruit per lot arrive at the laboratory.
How it is used in a quality laboratory
- Connect the head suited to the species to be analysed.
- Choose the measuring protocol, for example the number of readings per fruit and the ripeness classes.
- Place the fruit one after the other: with autotrigger the measurement starts by itself.
- At the end of the sample, the instrument shows the results with charts, histograms and class breakdowns.
- The data are exported for archiving or statistical analysis.
Designed for the laboratory
MultiMeter is designed for laboratory use and runs on mains power. It is not intended for field measurements: for those there are the DA-Meter® handhelds, for standard fruit, cherries and kiwifruit, which use the same measuring principle.
Frequently asked questions
What is the difference between MultiMeter and the DA-Meter® handhelds?
The handhelds are portable, battery-powered, and each is dedicated to one type of fruit. MultiMeter stays in the laboratory, accepts different heads and also offers analysis and charting functions.Can I add a head later?
Yes, heads can also be bought later and the instrument recognises them by itself.
Request information or a quote
Tell us the type of fruit, the measurements you want to take and how the instrument will be used. We will get back to you to suggest the most suitable configuration and measuring head.
